Saito 72 Golden Knight AAC with Muffler
Saito 72 Golden Knight AAC with Muffler
- 15% lighter than other standard 70s
- New splined throttle arm
- Baked on gloss-black finish with shiny gold value covers
- The perfect engine for Hangar 9's Cub and .40-.50 size 3D airplanes
- Lightweight AAC Construction
OVERVIEW
If you're looking for a 4-stroke to overpower your .60-size airplane, you'll want to check out Saito's latest release. Saito's new .72 fits in the same space as most 60s and at just 16.6 oz, it's the lightest weight engine in this 4-cycle displacement category.
The .72 features an all-new crankcase with the same mounting dimensions as the Saito .56. This is achieved by narrowing the case just below the mounting flanges. Our staff has over 2 hours of run time on the .72, both on the bench and in a Hangar 9 .60-size Super Stick.
On the bench we compared the new .72 to the Saito .65 and to its nearest competitor using several different props. The new .72 consistently turned 400-600 rpm more than its .65 sibling and 200-300 rpm more than its nearest competitor on the same fuel. Also, the .72 weighs 3 ounces less than both, giving a much greater power-to-weight ratio than other brands.
In the 71/2-pound Super Stick, the .72 gives unlimited vertical performance. Handling, starting, idle, and transition are excellent, just what we've come to expect with Saito engines.
Saito's .72 is available in a standard version or a Golden Knight version featuring a gloss black powder-coated finish with gold rocker covers. For overpowering performance at a fraction of the weight, check out Saito's new .72.
SPECIFICATIONS
Type: 4-stroke
Displacement: .72 cu in (11.80 cc)
Bore: 1.06 in (27.0 mm)
Stroke: 0.81 in (20.60 mm)
Cylinders: Single - Chrome Plated
Total Weight: 16.6 oz
Engine (Only) Weight: 16.0 oz
Muffler Weight: 0.6 oz
Crankshaft Threads: M7 x 1mm
Benchmark Prop: 13x8 APC @ 9,800
Prop Range: 12x8 - 14x8
RPM Range: 2,000 - 12,000
Fuel: 10%-30% Synthetic
Mounting Dimensions: 104 x 56 x 111 mm
Muffler Type: Cast
Cylinder Type: AAC
Carb Type: Barrel, 2 Needle valve
Crank Type: Ball Bearing
Displacement: .72 cu in (11.80 cc)
Bore: 1.06 in (27.0 mm)
Stroke: 0.81 in (20.60 mm)
Cylinders: Single - Chrome Plated
Total Weight: 16.6 oz
Engine (Only) Weight: 16.0 oz
Muffler Weight: 0.6 oz
Crankshaft Threads: M7 x 1mm
Benchmark Prop: 13x8 APC @ 9,800
Prop Range: 12x8 - 14x8
RPM Range: 2,000 - 12,000
Fuel: 10%-30% Synthetic
Mounting Dimensions: 104 x 56 x 111 mm
Muffler Type: Cast
Cylinder Type: AAC
Carb Type: Barrel, 2 Needle valve
Crank Type: Ball Bearing