Features
Overview
Their great performance and small size make them perfect for small 3D and other park flyer models. The external rotor design eliminates the need for a gearbox, saving you valuable weight to get the maximum performance out of the model.
Tech Notes
You will need...
- 10-20A Brushless ESC
- 9x7 to 11x4.7 Prop
- 7.4V or 11.1V 860-1320mAh Li-Po
Specifications
Type: Brushless
Size: Replacement for 370/400
Bearings or Bushings: Bearings
Recommended Prop Range: 9x7 to 11x4.7
Voltage: 7.2 - 12
RPM/Volt (Kv): 920 (rpms per volt)
Resistance (Ri): .10 ohms
Idle Current (Io): .70 @10V (no load current)
Shaft Diameter: 1/8 in (3.17mm)
Overall Length: 1.15 in (29mm)
Weight: 56g (2.0 oz)
Overall Diameter: 1.10 in (28mm)
Diameter: 1.1 in (28mm)
Continuous Current: 10A
Maximum Burst Current: 13A
Cells: 6-10 NiCd/NiMh or 2-3 LiPo
Speed Control: 10 - 20 Amp Brushless