Yak 54F 3D ARF by E-Fllite

From the fertile imagination of 4-time TOC winner Quique Somenzini comes E-flite's Yak 54F 3D ARF. Featuring Quique's unique 3-dimensional A-frame foam construction and flat-wing design, the Yak is an extreme electric model capable of a broad assortment of thrilling precision and 3D aerobatics. Key to its intricate maneuverability is its lightweight A-frame fuselage, which reduces flex to provide precise control. It's also stronger and stiffer than typical profile planes, which allows for more stable performance, even in windier conditions, so that a seasoned pilot can still attain his aerobatic potential outdoors.

 From high-speed rolls to super-slow harriers, the Yak's smoothness and precision provides a wider range of performance than any other foamy out there. A gearbox and prop are included and for optimum performance, the Yak 54F should be flown with an E-flite Park 370 brushless motor (EFLM1000), 20-amp ESC (EFLA311) and 1320mAh 3-cell Li-Po battery pack (THP13203S). For a direct-drive alternative, try the Park 400 Outrunner series (EFLM1305).

 

Brushless Motor

Brushless ESC

4+ Ch Radio 3 or 4

Sub-micro Servos

Long Servo Arms

4+ Ch Receiver

Li-Po Battery

Li-Po Charger

Foam Safe CA

 

Specifications

Approx. Flying Duration: 10-15 minutes

Control Throw (Rudder): 2 1/2" Left / 2 1/2" Right

Control Throw (Elevator): 2 1/4" Up / 2 1/4" Down

Control Throw (Ailerons): 2" Up / 2" Down

Recommended Battery: 860 - 1320 mAh 11.1V Li-Po

Speed Control: 20-Amp Brushless

Hardware Included: Yes

Prop Size: 12 x 6 (included) or 11 x 4.7 or smaller for Outrunners

CG (center of gravity): 3/8 - 1 3/4 in (10 - 45 mm) Behind Wing Spar

Trim Scheme Colors: Painted Red / Blue / Yellow

Servos: 3 Sub-Micro

Radio: 4+ Channels

Motor Size: Park 370 Brushless, 4100 Kv or Park 400 Outrunner, 940 Kv

Flying Weight: 12 - 14 oz (340 - 400 g) w/ Battery

Wing Area: 345 sq in (22.2 sq dm)

Overall Length: 37.5 in (950 mm)

Wing Span: 37 in (940 mm)