Paco Art Center :: Boats :: Ready To Run :: ShockWave Super sport 55"(1400) Ready To Run

ShockWave Super sport 55"(1400) Ready To Run

ShockWave Super sport 55"(1400) Ready To Run
FEATURES
  • No assembly required RTR
  • High-performance Zenoah? G-26M gas engine & tuned exhaust installed
  • Enhanced engine mounting system makes maintenance and adjustment easy
  • Clutch and water pump let the ShockWave idle safely without overheating
  • Stainless steel dual rudder design offers incredibly sharp handling and durability
  • High-quality, pre-painted, fiberglass composite deep-V hull with Super Sport trim scheme
  • JR? XR3i 3-channel radio system installed
OVERVIEW

The Pro Boat ShockWave 55 SS is a professionally built, ready-to-run deep-V fiberglass model. Powered by the potent Zenoah? G26M engine, the boat has a clutch, water pump, dual rudders and tuned pipe.

The new Shockwave 55 Super Sport RTR Deep-V Speedboat features scale detail, incredible Super Sport handling and intense power, all in a ready-to-run package.
Pull the cord to start the installed Zenoah G-26M engine. The sound of intense horsepower is tempered only by the tuned pipe and your hand on the throttle
Pull the trigger on the included JR XR3i transmitter; dual rudders cut through the waves for sharp turns at high speeds.
The clutch system allows you to start and tune the engine without the propeller engaging, for safer setup and operation. And the water pump design ensures that the engine will get plenty of cooling, even while the boat is standing still in the water.
Stainless steel dual rudders have been specially designed to maximize the ShockWave?s cornering ability and handling. The Prather propeller and adjustable surface drive system offer plenty of thrust for maximum speed

 

Tech Notes
 
Flex Shaft Care:

Check the flex shaft after every run by rotating the propeller by hand (with the engine not running).  If you feel any binding, lubricate the flex shaft. The flex shaft should be cleaned by wiping with a rag and denatured alcohol then lubricated after 3-4 hours of operation and after sitting dormant for several weeks.

If you are running in saltwater you should clean and lubricate your flex shaft after every session.

Please refer to your owners manual for flex shaft removal.
 
You will need...
Zenoah? 2-Cycle Oil (ZEN20001)
CA or epoxy glue
Flex Shaft lubrication 
Fuel container
Fuel Pump 
12 ?AA? alkaline batteries (8 for the transmitter and 4 for the receiver)
Gasoline (+87 Octane) ethanol-free
 
SPECIFICATION
 
Length: 55 in. 1400mm
Beam: 15 in.
Engine Size: Zenoah G26M Included
Speed: 
45 M.P.H.
Radio: JR XR3i FM 75mHz Pistol grip, Included
Hull Material: 
Fiberglass composite
Prop Size: Prather B270
Hull Type: Deep V
Kit/RTR: Ready To Run
Drive System: Clutch/ surface flexdrive
Exhaust: water-cooled tuned pipe

32%
Details
SKU PRB2650
Weight 25,00 Kgr
 
Market price: € 1.016,26
Our price: 691,05 (USD 884,54)
Options
Quantity
: *
: *
: *
 
The ShockWave™ 55 SS features a sealed, water-resistant radio box that protects the included radio equipment from any water damage when you’re rocketing your boat across the lake
JR’s reliable XR3i radio and receiver come pre-installed with 2 Z-590 high-torque steering servos, offering unmatched control and response to every input.
The installed Zenoah G-26M engine offers unsurpassed power and reliability. Extended engine mounting rails offer additional support and easy engine removal. The carburetor comes pre-tuned with a new choke that makes starting easy.
The water-cooled tuned exhaust installed with the Zenoah G-26M engine helps you get every ounce of power and performance for blazing fast speed.
Stainless steel dual rudders have been specially designed to maximize the ShockWave’s cornering ability and handling. The Bronze alloy propeller and adjustable surface drive system offer plenty of thrust for maximum speed
The ShockWave 55 SS features a redesigned canopy and hatch area, allowing easier engine access and plenty of room for tuning and adjustments.
There is also a kill switch
Complete Body Set,Red: BCX2
Hardware Set: BMCX
Rc Paracoptor
Complete Body Set,Red: BCX2 Hardware Set: BMCX Rc Paracoptor
€ 32,36
€ 1,39
€ 29,51
 
Spare starter shaft DH
Tail Pitch Assembly/ New
Flybar Control Arm
Spare starter shaft DH Tail Pitch Assembly/ New Flybar Control Arm
€ 12,38
€ 16,13
€ 13,78
 
M4.5 x 20 - Threaded Hex Spacer
Motor Set
Wing : SW 55SS
M4.5 x 20 - Threaded Hex Spacer Motor Set Wing : SW 55SS
€ 4,02
€ 11,35
€ 17,87

Customer Reviews

There have been no reviews for this product.

Add your review here

: *
: *
Type the characters you see in the picture:


*