- per page
Long Full Arm FUTABA
SKU: H1000
Machined from high grade light alloy and anodised in various colours. All holes drilled and threaded to accept M2 fixings. Holes spaced from centre at - 7 - 12.5 - 17.5 mm. Available in Blue and Red
Our price: € 4,62
(USD 5,91)
Long Full Arm
SKU: H1001
Machined from high grade light alloy and anodised in various colours. All holes drilled and threaded to accept M2 fixings. Holes spaced from centre at - 7 - 12.5 - 17.5 mm. Available in Blue and Red
Our price: € 4,62
(USD 5,91)
Long Half Arm FUTABA
SKU: H1010
Machined from high grade light alloy and anodised in various colours. All holes drilled and threaded to accept M2 fixings. Holes spaced from centre at - 7 - 12.5 - 17.5 mm. Available in Blue and Red
Our price: € 4,19
(USD 5,36)
Long Half Arm JR
SKU: H1011
Machined from high grade light alloy and anodised in various colours. All holes drilled and threaded to accept M2 fixings. Holes spaced from centre at - 7 - 12.5 - 17.5 mm. Available in Blue and Red.
Our price: € 4,19
(USD 5,36)
28mm Push-Pull Wheel FUTABA
SKU: H1080
Machined from high grade light alloy and anodised in various colours - 28mm diameter. All holes drilled and threaded to accept M2 fixings. A total of 24 holes at 7.5, 9, 10.5 & 12mm from centre allowing various offsets and spacings. Available in Blue and Red
Our price: € 5,87
(USD 7,51)
28mm Push-Pull Wheel JR
SKU: H1081
Machined from high grade light alloy and anodised in various colours - 28mm diameter. All holes drilled and threaded to accept M2 fixings. A total of 24 holes at 7.5, 9, 10.5 & 12mm from centre allowing various offsets and spacings. Available in Blue and Red
Our price: € 5,87
(USD 7,51)
Push-Pull Throttle Arm
SKU: H2500
Push pull throttle arm to suit OS 50 - 90 and YS 60-90 engines, a direct replacement for the original plastic arm. Machined from high grade light alloy and anodised in either purple, blue or red.
Our price: € 5,55
(USD 7,10)
Single Throttle Arm
SKU: H2501
A direct replacement for standard plastic arms on OS 50 - 90 and YS 60 - 90 motors. This alloy unit is far stronger and will not flex, choice of 3 fixing points with M2 threads Machined from high grade light alloy and anodised in either purple, blue or red.
Our price: € 4,12
(USD 5,27)
Carbon Flybar Stiffeners 3mm flybars
SKU: H4020
These carbon fibre flybar stiffening sets simply slide over the flybar and lock in place with alloy collars. Provide important bending resistance and help protect from handling damage. Available in blue, gold, purple, red, silver.
Our price: € 9,75
(USD 12,48)
Carbon Flybar Stiffeners 4mm flybars
SKU: H4030
These carbon fibre flybar stiffening sets simply slide over the flybar and lock in place with alloy collars. Provide important bending resistance and help protect from handling damage. Available in blue, gold, purple, red, silver.
Our price: € 10,59
(USD 13,56)
120 CCPM Precision Swashplate
SKU: JAC 06
CNC machined precision alloy swashplate suitable for the CCPM control system. Manufactured to the same high standards and specification as our MPM AirSkipper swashplate. Available in Red
Our price: € 58,40
(USD 74,75)
Market price: € 79,00
, save 26%
High Efficiency Cooling Fan
SKU: JAD 07
Machined from high tensile alloy, this cooling fan features aerofoil sectioned angled vanes to provide greater cooling efficiency without sacrificing engine power. A direct replacement for the stock plastic fan. The underside of this fan features a pair of machined pockets suitable for the mounting of 5mm diameter throttle governor magnets as used in the Futaba GV-1, Throttle Jockey and Rev-Lock units Available in Satin Silver
Our price: € 33,41
(USD 42,76)
Canopy Mounting Pylon Set
SKU: JAF 03
High quality 4 piece alloy canopy mounting set to replace the basic hexagonal bar, resistance fit originals. Supplied complete with larger grommets to increase surface area on the glassfibre canopy and all necessary fixing screws. Availble in Satin Silver or Red Finish
Our price: € 13,40
(USD 17,15)
Tail Brace / Fin Mount
SKU: JAT 12
Machined from solid alloy, this tailboom brace and fin mounting clamp offers a secure fitting for our matching carbon tail plane and twin stay boom support kit. Please note that this part is not compatible with the original plastic tail plane or single boom stay.
Available in Red and Satin Silver Finishes
Our price: € 23,53
(USD 30,12)
Market price: € 33,00
, save 29%
Carbon Fibre Tail Fin
SKU: JAT 151
These carbon fibre tail fins are available in cut-out 3D styles. CNC machined from highest quality multi laminated carbon composite. Lightweight and strong !
Our price: € 12,98
(USD 16,61)
Carbon Fibre Tail Plane
SKU: JAT-141
These carbon fibre tail planes are available in cut-out 3D styles and are designed to be used with our alloy boom clamp (Part # JAT12)
CNC machined from highest quality multi laminated carbon composite. Lightweight and strong !
Our price: € 12,98
(USD 16,61)
M3 CANOPY SCREW
SKU: M3 CANOPY SCREW
Functional and an excellent finishing touch, colour coded M3 canopy mounting screws. Lightweight alloy body with hardened M3 steel screw stud. (Supplied in packs of 4)
Our price: € 6,09
(USD 7,80)
M3 SCREW FINISHING CAPS
SKU: M3 SCREW FINISHING CAPS
The perfect finishing touch, colour coded M3 screw caps. Provide increased load bearing area, ideal for use on Carbon or Glass frames (Supplied in packs of 20)
Our price: € 11,34
(USD 14,52)
Market price: € 15,00
, save 24%
HEADER TANK
SKU: QH5510
Header tanks increase fuel flow reliability and prevent air bubbles from reaching the carburettor. This header tank adds to these features by incorporating a CNC machined alloy mounting bracket + matching machined alloy tank cap. Available in blue, gold, purple, red and polished silver.
Our price: € 21,00
(USD 26,88)
Receiver Protection Case
SKU: QUICK 008
This is the ultimate in receiver protection. Made from tough glass-filled nylon plastic and lined with special anti-static foam, this case protects your RX from vibration and the most severe impact damage.
Our price: € 7,55
(USD 9,66)
- per page
