Futaba Gyro GY611+S9256 Servo

This is the Futaba GY611 Gyro with the S9256 Digital Servo.

	

		

		
	


		

				FEATURES: Super narrow pulse drive system substantially improves servo response

		

				Microcomputer high-speed arithmetic processing substantially improves

		

				gyro response

		

				High-resolution 12-bit A/D (Analog to Digital) accurately converts

		

				sensor output to a Digital Signal

		

				SMM (Silicon Micro Machining) micro-machining mechanical parts and

		

				systems right on a silicon chip and also low-back aeroform case

		

				improves vibration resistance and neutral characteristic

		

				AVCS (Angular Vector Control System) (same as Heading Hold) system

		

				requires a high-precision angular velocity detection function and

		

				extremely small output drift by using a new type of gyro sensor.

		

				This minimizes rudder neutral position drift during flight and

		

				eliminates the need to trim the rudder during flight.

		

				Futaba S9256  Digital Servo is fully compatible with

		

				super narrow pulse drive and features high response (.06 sec/60°)

		

				and Alumite case with heat sink to cool the motor

		

				


		
	


		

				INCLUDES: Futaba GY611 sensor, control amp, S9256 servo, mini screwdriver,

		

				3 sections double sided tape and instruction sheet

		

				


		
	


		

				REQUIRES: 4.8V Rx battery ONLY (higher voltage could damage the servo)

		

				Assembly and adjustment onto the helicopter

		

				


		
	


		

				SPECS:    GY611 Ratings;

		

				Yaw-axis stabilizer for helicopter (rate gyro)

		

				Display Device: 8-character dot matrix Liquid Crystal Display

		

				Operating Voltage Range: DC 3.8V to 5V

		

				Current Drain: 70mA @ 5V, including sensor

		

				Dimensions: Amp 2.2"x 1.2"x .59" (57 x 32 x 15mm)

		

				Sensor 1.2"x 1.2"x .71" (30 x 30 x 18mm)

		

				Weight: Amp  1.19oz (34g)

		

				Sensor 1.05oz (30g)